Wireworld Starlight® 6 HDMI Cable Overview
The Starlight® 6 is a high-end HDMI® cable which is designed to provide superior sound and image quality. It utilises the WireWorld Symmetricon™ innovative flat construction design resulting in significantly lower loss and higher precision than the conventional round HDMI® cable design, which has been used in computer cables for decades.
The Starlight® 6 features 24AWG silver-clad OFC conductors & zinc die-cast connectors.
The Starlight® 6 (all lengths) is a High Speed with Ethernet HDMI® Cable– supports the highest approved HDMI data rate, 10.2Gbps, covering 1080p, HD4K, Deep Colour and all 3D formats.
The Starlight® 6 benefits from the unique WireWorld award winning Symmetricon™ (formely Symmetric Balanced Pair) proprietary cable design, which utilize sixteen signal conductors instead of twelve conductors found in conventional HDMI® cables. This unique and original design features parallel conductors with two drain wires per shield pair, which reduces attenuation and provides greater impedance uniformity.

Wireworld Starlight® 6 HDMI Cable Specifications
| Conductors: | Silver-clad Oxygen Free Copper, 24AWG |
| Insulation: | Gas-injected Polyethylene foam |
| Contacts: | 24k Gold/silver/Cu alloy |
| Connectors: | Die-cast zinc |
| Available lengths: | 0.3, 1m, 2m, 3m, 5m, 7m, 9m, 12m*, 15m* & 20m* |
| Dimensions (WxT): | 18mm x 4.5mm (cable), 20mm x 10mm (plug) |
* = These cables feature Active Eq. circuits. Cable direction MUST be observed for these cables to function properly, and to avoid damage.
IMPORTANT: Please observe the correct cable orientation during installation.
The cable is marked with an arrow "→" which indicates signal direction.
e.g. Bluray/DVD → AV Receiver→ TV/Projector
WireWorld's Quality Assurance
WireWorld is leading the way in verifying the quality of all its HDMI® products. WireWorld’s range of HDMI® cables are subjected to a very exact quality control and testing procedures. Each and every cable goes through a full electrical test and visual inspection. Only the samples that meet our strict criteria are shipped to customers worldwide.
”Eye Pattern” test
Eye pattern test is performed to determine the capability of the cable to carry the specified (as laid down by The HDMI Licencing, LLC) digital video signal over the length of any given HDMI® cable.